Product-3
Product-3 description
HIGH DURABILITY
WATER RESISTANT
Available Packs
Directions for Use
Plaster
The masonry surface to work on should be treated and well cured for the process of Sirca Fresco Matt Finish. Better to allow a gap of 2B day before the process.
Filling for cracks
The masonry surface to work on should be treated and well cured for the process of Sirca Fresco Matt Finish. Better to allow a gap of 2B day before the process.
Cleaning
Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use SIRCA Paints Damp Block to limit further dampness. Even after cleaning if the surface shows chalkiness, use SIRCA Paints Exterior Sealer to get an even surface.
Filling for holes & dents
In case of dents and holes use SIRCA Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.SIRCA FRESCO MATT should not be applied on surfaces/substrates that are subjected to continuous seepage or dampness.
Precautions
Follow these guidelines to ensure optimal application and long-lasting performance.
- Do not apply when ambient temperature is less than 10°C...
- Do not over-thin or over-extend the brush.
- Tint using machine colourants only.
- Stir well and strain before use.
- Tinted paints need thorough shaking immediately after tinter addition as well as before use.
- For best performance ensure that the surface is dry...
Painting Care
Proper maintenance ensures durability, long-lasting beauty, and sustained performance over time.
- The golden rule for removing any wall stains is that one should remove it immediately.
- Remove all dirt using a clean cloth...
- For regular household stains like pencil, tea, coffee...
- In case of tough stains like turmeric, sketch pen...
